For consumers who are looking for a solid floor jack, the Hein-Werner HW93642 is a top contender. It has a wide casing and compact base design that helps support heavy loads. This floor jack has a maximum capacity of 2 tons and it has a lift arm made from cast iron making it durable and strong.
With this device you’ll experience easier aligning and pumping because it operates with its in-line pump assembly that eliminates off-center elements. Another element that helps make the lifting easier is the handle of the jack which comes in one piece.
Hein-Werner HW93642 Floor Jack Review
Hein-Werner HW93642 has always been one of the leading models for a floor jack that is why it has an editorial rating of 8 out of 10. The majority of buyers are satisfied with the performance of their equipment because it can lift any 2-ton car, truck or SUV that weighs 2 tons without any problem. They appreciate that the base of this floor jack is much wider compared from other jacks out there.
Another thing buyers notice about this floor jack is its top excellent appearance which somehow assures them of the products quality. Since most consumers are particular about where products are made, they feel confident since this device is 96% made in the US. Important parts of the unit like lift, pump, arm etc. are all made in the US and just small components are outsourced.
Improved Base and Lift Arm Strength
A floor jack should have maximum strength in order to withstand constant use in your garage. With the Hein-Werner HW93642, you get extra durability because the unit’s base is made from steel. Adding to the strength of the unit is its lift arm which is made from cast iron so it can do all the lifting work for you.
The lift arm of this floor jack can carry up to 2 tons of vehicle weight and it can lift up to 20 ½ inches off the ground with the help of the base pump that is specially built to tackle activities that involve lifting of heavy objects.
Flagged side plates are featured in this jack and it also includes a wider frame to increase its stability. This floor jack is known for its precise load control because of its U-joint release mechanism as well as its overall design.
You will notice that the service jack is entirely made of steel material that is why it is very strong and can carry much heavier weight compared to other regular jacks.
System Design for Lifting and Lowering
The Hein-Werner HW93642 has a one piece lifting pole that is extremely rigid because it is made from steel. This handle also minimizes bending thus, it contributes to an easier lifting process. It’s integrated and sealed hydraulic pump is guaranteed to provide long-lasting service from the floor jack.
This unit features a minimum lifting height of 4 1/2 inches and a maximum height of 20 ¼ inches. Its handle length is 50 inches and the saddle diameter has the measurement of 6 ¾ inches.
Hein-Werner HW93642 Features and Specifications
- 2 ton or 4,000 pounds load capacity
- Maximum lifting height of 20.25 inches
- Minimum lifting height of 4.5 inches
- Dimensions of 32 x 8 x17 inches
- Weighs at 99 pounds
- Assembled in USA
- Strong pump and cast iron lift arm that adds extra strength where it’s needed
- Flanged side plates and wider than the usual frame for extra stability
- One piece handle
- U-Joint release mechanism that guarantees precise load control
- Large rear and front wheels, as well as casters for enhanced mobility
- Sealed hydraulic pump
- In-line pump assembly
- 2-year warranty
Things to Improve
The only thing that bothered some buyers about this device is that it only has a 5 inches minimum lift height so you can’t use it for vehicles with very low profile. So when you choose to buy this floor jack, make sure you will use it on vehicles with not less than 5 inches of ground clearance or you won’t be able to use it at all.
Other than this minor issue, buyers don’t have any other problem with the Hein-Werner HW93642. It has been proven to be strong, reliable and very safe to use that’s why many buyers are recommending this product to other potential buyers.
Conclusion
The Hein-Werner HW93642 is one that can stand any kind of heavy work dished out on its way. It is built like a tank and is designed to take in all the wears and tears of the job without affecting its functionality. Despite how demanding the work is, your jack will still be as reliable in lifting 2-ton weights and can still lift up to 20 ¼ inches high.
Related articles